1. Compared to the driving force, the sliding screw pair is 1/3

由于滾珠絲杠副的絲杠軸與絲杠螺母之間有很多滾珠在做滾動運動,所以能得到較高的運動效率。與過去的滑動絲杠副相比驅動力矩達到1/3以下,即達到同樣運動結果所需的動力為使用滾動絲杠副的1/3。在省電方面很有幫助。

Due to the rolling motion of many balls between the screw shaft and the screw nut of the ball screw pair, high motion efficiency can be achieved. Compared with the past sliding screw pair, the driving torque reaches less than 1/3, which means that the power required to achieve the same motion result is 1/3 of that of using a rolling screw pair. It is very helpful in saving electricity.

2、高精度的保證

2. High precision assurance

滾珠絲杠副是一般是用世界水平的機械設備連貫生產出來的，特別是在研削、組裝、檢查各工序的工廠環境方面,對溫度、濕度進行了嚴格的控制，由于完善的品質管理體制使精度得以充分保證。

Ball screw pairs are generally produced continuously using the world's highest level of mechanical equipment, especially in the factory environment of grinding, assembly, and inspection processes. Temperature and humidity are strictly controlled, and precision is fully guaranteed due to a sound quality management system.

3、微進給可能

3. Micro feed may

滾珠絲杠副由于是利用滾珠運動,所以啟動力矩極小,不會出現滑動運動那樣的爬行現象,能保證實現精確的微進給。

Due to the use of ball motion, the ball screw pair has minimal starting torque and does not experience crawling like sliding motion, ensuring accurate micro feed.

4、無側隙、剛性高

4. No side clearance, high rigidity

滾珠絲杠副可以加與預壓,由于預壓力可使軸向間隙達到負值,進而得到較高的剛性(滾珠絲杠內通過給滾珠加予壓力,在實際用于機械裝置等時,由于滾珠的斥力可使絲母部的剛性增強)。

The ball screw pair can be pre pressed, as the pre pressure can cause the axial clearance to reach a negative value, thereby obtaining higher rigidity (by applying pressure to the ball in the ball screw, when used in mechanical devices, etc., the repulsive force of the ball can enhance the rigidity of the wire base).

5、高速進給可能

5. High speed feed may

滾珠絲杠由于運動效率高、發熱小、所以可實現高速進給(運動)。

The ball screw can achieve high-speed feed (motion) due to its high motion efficiency and low heat generation.

本文的精彩內容由導軌絲杠提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://www.zhaoxiaohe.cn我們有專門的客服為您解答問題

The exciting content of this article is provided by the knowledge provided by the guide screw. There are also many exciting content on this website, and you can click to enter more content: http://www.zhaoxiaohe.cn We have dedicated customer service to answer your questions